NaFeTiO4: A novel visible light active photocatalyst for water splitting and environmental remediation

Single phase, crystalline NaFeTiO₄ with tunnel structure is prepared by a solid state method and explored as a novel photocatalyst for the first time. Structural, optical and morphological properties of NaFeTiO₄ are investigated by various characterization techniques such as X-ray diffraction (XRD), scanning & transmission electron microscopy (SEM & TEM), Energy dispersive X-ray spectroscopy (EDS), N₂ adsorption-desorption study (BET), UV-vis, X-ray photoelectron, X-ray absorption (UV-vis DRS, XPS and XANES) and photoluminescence (PL) spectroscopy. The interfacial charge transfer ability of the prepared n-type NaFeTiO₄ was also investigated by transient photocurrent response and electrochemical impedence spectroscopy which proved to be an efficient tool for better understanding of electronic properties of NaFeTiO₄. The photocatalytic efficiency of NaFeTiO₄ is evaluated for decomposition of methylene blue (MB) and Rhodamine B (RhB) dyes as well as for H₂ evolution through water splitting reaction under visible light. NaFeTiO₄ exhibits efficient charge separation properties, excellent photocatalytic activities and reusability.     

Thermodynamic analysis of natural gas reciprocating compressors based on real and ideal gas models

The accurate modelling and investigating effects of various parameters of the reciprocating compressors are important subjects. In this work, based on first law of thermodynamics, conversation of mass and real and ideal gas assumptions, a theoretical analysis has been constructed to simulate natural gas reciprocating compressors. For computing the thermodynamic properties of natural gas based on real gas model, the AGA8 equation of state has been used. Numerical results validated with previous measured values and showed a good agreement. The effects of important parameters such as: angular speed, clearance and pressure ratio have been studied on the performance of the compressors. The results reveal the in-control volume temperature for ideal gas is more than real gas model but the mass flow rate and work for real gas is higher than ideal gas model. On the other hand, the indicated work that required for compression is greater for ideal gas model.     

Ultrasonic tomographic velocimeter for visualization of axial flow fields in pipes

An ultrasonic tomographic velocimeter to provide quantitative images of axial flow fields in pipes is developed and presented in this work. To detect the flow in various directions and positions, a novel transducer configuration strategy is proposed. All-in-one transducers are mounted in two sectional planes of the pipe. In each plane, N transducers are equally spaced along the circumference. Overlapped propagation paths are introduced by the configuration strategy, and the influence of the vortex flow can be eliminated theoretically by averaging the line velocities of the overlapped paths. To achieve a fast detection speed, the projection data is collected via an electrical scan in a fan-beam mode. After rearrangement and interpolation of the projection data, the parallel beam filtered back projection (FBP) algorithm is implemented to reconstruct the axial flow field. Numerical simulations with the theoretical velocity profiles were performed. The compensation method for the vortex flow is proved to be effective and necessary, and the number of transducers required for reconstruction of common flow profiles was estimated. Accordingly, an ultrasonic tomographic velocimeter consisting of 2×12 transducers was fabricated. Experiments were conducted in the straight pipe and downstream of a single bend pipe and compared with the computational fluid dynamics (CFD) simulation results. As demonstrated, the ultrasonic tomographic velocimeter was capable of visualizing both symmetric and asymmetric axial flow fields with high reliability.     

Investigation on phase shifting for a 4 K Stirling pulse tube cryocooler with He-3 as working fluid

He-3 is generally recognized for its ability to provide more excellent thermophysical performance than He-4, especially in the 4 K temperature range. However, this was not always the case in our preliminary experiments on a three-stage Stirling-type pulse tube cryocooler (SPTC). Our ongoing studies, as reported in this paper, demonstrate that the different working fluids also affect the performance through their phase shifting capability. This feature has been passed over in large part by researchers considering refrigerant substitution. Unlike previous theoretical analyses that focus primarily on regenerator losses, this report investigates the effects of the working fluid on the phase angle at the cold end in order to quantitatively reveal the relationship between the lowest attainable temperature and the cooling capacity. The analysis agrees well with our experimental results on a three-stage SPTC. While running with the operating parameters optimized for He-3, the lowest temperature of the SPTC decreased from 5.4 K down to 4.03 K. This is the lowest refrigeration temperature ever achieved with a three-stage SPTC.     

A modified cross-correlation algorithm for PIV image processing of particle-fluid two-phase flow

PIV (Particle Image Velocimetry) technique for flow field measurement has achieved popular self-identify through over ten years development, and its application range is becoming wider and wider. PIV post-processing techniques have a great influence on the success of particle-fluid two-phase flow field measurement and thus become a hot and difficult topic. In the present study, a Phase Respective Identification Algorithm (PRIA) is introduced to separate low-density solid particles or bubbles and high-density tracer particles from the PIV image of particle-fluid two-phase flow. PTV (Particle Tracking Velocimetry) technique is employed to calculate the velocity fields of low-density solid particles or bubbles. For the velocity fields of high-density solid particles or bubble phase and continuous phase traced by high-density smaller particles, based on the thought of wavelet transform and multi-resolution analysis and the theory of cross-correlation of image, a delaminated processing algorithm (MCCWM) is presented to conquer the limitation of conventional Fourier transform. The algorithm is firstly testified on synthetic two-phase flows, such as uniform steady flow, shearing flow and rotating flow, and the computational results from the simulated particle images are in reasonable agreement with the given simulated data. The algorithm is then applied to images of actual bubble-liquid two-phase flow and jet flow, and the results also confirmed that the algorithm proposed in the present study has good performance and reliability for post-processing PIV images of particle-fluid two-phase flow.     

高温氢工质热物理性质计算分析

氢工质在新能源与动力、航天推进、化工材料等领域有着广泛应用。通过开展高温氢工质热力学与输运性质研究，建立了原子态氢、分子态氢、热解平衡态氢的热物理性质计算模型，开发了热物性计算程序Prop_H_H2，适用范围为温度100~3 500 K、压力104~5×107 Pa 。验证表明，Prop_H_H2在适用范围内计算氢工质的物性参数合理可靠，在温度200~3 000 K、压力104~107 Pa范围内，程序预测值更加准确，相对偏差在±5%左右。本研究可为氢工质相关的航天推进、应用物理学、能源动力等行业的科研和应用提供支持借鉴。     

气固流化床介尺度结构形成机制及过滤曳力模型研究进展

气固流化床中,介于颗粒与宏观尺度间的复杂的时空多尺度结构（介尺度结构）将完全改变气固相间作用规律,加大了流态化系统调控及预测的难度。为此,需要构建考虑结构影响的相间本构关系。其中,曳力作为影响流态化动力学特征的主导因素,对其研究尤为重要。从结构产生演化的机制出发,概述结构影响曳力的机理,以模型构建流程的角度对结构和过滤两类模型进行总结,并重点综述过滤模型构建在提升准确性、有效性、通用性和考虑更多物理机制方面的最新进展。研究表明：提升模型通用性和考虑真实系统中更丰富的物理机制仍是建模中亟待解决的问题,结合结构演化机制理性建模和充分发挥机器学习数据分析处理优势或是曳力建模进一步发展的关键。     

Gas-cooled reactor thermal hydraulic analyses with MELCOR

Pursuant to the Energy Policy Act of 2005, the High Temperature Gas-Cooled Reactor (HTGR) has been selected as the reference design for the Next Generation Nuclear Plant (NGNP). Stemming from a U.S. Nuclear Regulatory Commission (NRC) HTGR research initiative, a need was identified for validation of systems-level computer code modeling capabilities in anticipation of the eventual need to perform licensing analyses. Because the NRC has used MELCOR for light water reactors (LWR) in the past and because MELCOR was recently updated to include gas-cooled reactor (GCR) physics models, MELCOR is among the system codes of interest to the NRC. This paper describes MELCOR modeling of the General Atomics' Modular High Temperature Gas-Cooled Reactor (MHTGR). The MHGTR is a suitable design for demonstration of MELCOR GCR modeling competency for two reasons: 1) the MHTGR is a predecessor to the more advanced General Atomics’ Gas-Turbine Modular High Temperature Reactor (GTMHR), and 2) experimental data useful for benchmark calculations may soon become available. Using the most complete literature references available for the MHTGR design, researchers at Texas A&M University (TAMU) constructed a MELCOR input deck for the MHTGR to partially validate MELCOR GCR modeling capabilities. Normal and off-normal system operating conditions were modeled with appropriate boundary and initial conditions. MELCOR predictions of system response were obtained for steady-state, pressurized conduction cool-down (PCC), and depressurized conduction cool-down (DCC) scenarios. Code results were checked against nominal MHTGR design parameters, physical intuition, and anticipated GCR thermal hydraulic response. No inherent deficiencies in MELCOR modeling capability were observed, suggesting that the newly-implemented GCR models are adequate for systems-level analysis. If and when experimental benchmark data becomes available, further validation activities may proceed given the modeling efforts discussed herein.     

γ射线法测量高压管束间气液两相流的截面含气率分布

在立式蒸汽发生器垂直管束间的气液两相流中，截面含气率是其中一个重要参数。使用γ射线法对高温高压下垂直管束间气液两相流截面含气率的分布规律进行了实验研究。实验压力分别为5、7、9 MPa，质量流速为300 kg/(m²?s)，热力学干度的范围为0.003 ~ 0.4。实验得到了垂直管束间截面含气率随热力学干度、体积含气率和压力的变化关系；并与经典公式的计算结果对比发现，在低干度区域，实验结果与Miropolskii模型、Smith模型和Armand模型偏差较大，均大于30%，在高干度区域偏差较小；基于Armand理论，通过多元线性回归法拟合出本文工况下平均截面含气率的计算关联式，与日本核动力工程公司(NUPEC)的实验数据偏差小于15%。本研究对蒸汽发生器的结构设计和流动特性研究具有重要意义。     

Criticality of the thorium burnup in equilibrium state

The effective neutron multiplication factor (k_eff) as a function of burnup for different volume coolant (CoR) and fuel (FR) to cell ratio is presented. Additionally the Conversion Ratio (CR) of Th-232 to U-233, concentration of U-233, fissile and fission products calculation as a function of burnup are presented. The assembly is a critical reactor which makes volumes of coolant and fuel changes possible. In addition, an analytical model of calculation of k_eff as a function of U-233 and a poison concentration in equilibrium state are presented. One can achieve the criticality of Thorium Breeder Reactor (TBR) for enough high average neutron energy which one can obtain in Fast Breeder Reactor (FBR) only. The maximal value of CR and burnup for case of k_eff ≥ 1 achieves 1.4 and 360 GWd/MTU, correspondently. The calculations were done with a MCNPX 2.7 code using F₂Be, Na and Pb coolants.